QR2STL: Generate STL Files to 3D Print QR Codes

You are viewing an old revision of this post, from February 9, 2020 @ 14:13:21. See below for differences between this version and the current revision.

Qr2STL is an site that will let you put in a text, etc. for a QR code, and then output an STL file suitable for being 3D printed.

Post Revisions:

Changes:

February 9, 2020 @ 14:13:21Current Revision
Title
Deleted: Generate STL Files to 3D Print QR Codes  Added: QR2STL: Generate STL Files to 3D Print QR Codes
Content
Unchanged: <!-- wp:paragraph --> Unchanged: <!-- wp:paragraph -->
Deleted: <p><a href="https:/ /flxn.de/qrcode2stl/" class="ek-link">Qr2STL</a> is an site that will let you put in a text, etc. for a QR code, and then output an STL file suitable for being 3D printed.</p>  Added: <p><a href="https:/ /flxn.de/qrcode2stl/" class="ek-link">QR2STL</a> is a site that will let you put in a text, etc. for a QR code, and then output an STL file suitable for being 3D printed.</p>
Unchanged: <!-- /wp:paragraph --> Unchanged: <!-- /wp:paragraph -->

Note: Spaces may be added to comparison text to allow better line wrapping.

Leave a Reply